Medical Equipment Repair & Calibration · Texas

Medical Equipment Repair & Calibration in Texas

Connect your Texas healthcare facility with a qualified biomedical technician for repair, calibration, PCREE testing, and preventive maintenance. Free quote within 24 hours.

Get a Free Texas Quote →

Biomedical Equipment Services in Texas

Texas's healthcare sector includes approximately 1230 skilled nursing facilities licensed under Medicare and Medicaid, alongside physical therapy clinics, assisted living communities, urgent care centers, and medical offices across the South-Central. All of these facilities depend on properly functioning, calibrated, and documented medical equipment to deliver safe patient care — and to survive regulatory surveys.

Medical Equipment Repair Network connects Texas healthcare facilities with qualified biomedical technicians for the full range of equipment maintenance services: patient scale calibration, patient lift inspection, vital monitor repair, oxygen concentrator service, PCREE electrical safety testing, infusion pump repair, and preventive maintenance program management. Our technicians serve Texas's one of the largest PT markets in the country.

Texas Regulatory Oversight: The Texas Health and Human Services Commission — Long-term Care Regulatory conducts CMS Life Safety surveys for Texas's skilled nursing facilities. Surveyors review equipment maintenance documentation — including calibration records, PCREE test reports, and PM logs — as part of routine annual and focused surveys. Texas HHSC Long-term Care Regulatory surveys the state's massive SNF population. Texas has specific state requirements for long-term care that supplement federal CMS standards.

Texas has the largest skilled nursing facility population in the United States with over 1,200 licensed facilities. HHSC survey enforcement is active, and equipment maintenance documentation — including PCREE electrical testing, patient scale calibration, and patient lift inspection records — is routinely reviewed during Life Safety surveys.

For SNFs specifically requiring PCREE electrical safety testing and documentation, visit our dedicated portal at PCREEtest.com. For all other equipment repair, calibration, and PM services, submit your request below and we'll match you with a qualified Texas technician within 24 hours.

Facility Types We Serve in Texas

Skilled Nursing Facilities: Texas SNFs must comply with CMS Conditions of Participation for medical equipment maintenance and calibration. Our technicians provide the calibration reports, preventive maintenance documentation, and PCREE testing records your facility needs to stay survey-ready. Every service visit includes a written documentation package formatted for surveyor review.

Physical Therapy Clinics: Texas PT practices depend on accurate patient scales, functional patient lifts, and well-maintained e-stim and ultrasound devices. Our technicians service equipment from all major PT equipment manufacturers and provide calibration certificates for your records.

Assisted Living Communities: Assisted living facilities in Texas are not required to meet the same PCREE standards as SNFs, but must maintain functional medical equipment for resident safety. Our technicians service scales, lifts, and other equipment used in assisted living environments.

Urgent Care Facilities: Keep your Texas urgent care center at full capacity with timely repair and calibration of vital monitors, infusion pumps, chemistry analyzers, and diagnostic equipment. Our network covers urgent turnaround requests whenever possible.

Medical Offices: Our technicians service Welch Allyn, Philips, GE Healthcare, Midmark, and other major manufacturer equipment at medical office buildings and outpatient clinics throughout Texas.

Texas Cities We Serve

Our network includes biomedical technicians covering Texas's major markets. Click a city for local service information:

Houston San Antonio Dallas Austin Fort Worth El Paso Arlington Corpus Christi Lubbock Amarillo

Texas by the numbers · CMS survey data

Texas has 1,177 Medicare- and Medicaid-certified nursing homes with 133,493 certified beds. From September 2023 to August 2026, 127 (10.8%) were cited for at least one electrical safety deficiency on a Life Safety Code survey, below the national rate of 43.7% (rank #44 of 50, where #1 is the most cited).

K921 (equipment testing): 0 · K920 (power strips/cords): 88 · K914 (bedside receptacles): 21

Source: CMS Provider Data Catalog (Sept 2026). See the full state-by-state report. · Look up a specific nursing home → · State equipment citation ranking

Common Equipment We Service in Texas

Frequently Asked Questions — Medical Equipment Repair in Texas

Submit your service request through Medical Equipment Repair Network and we'll match your Texas facility with a qualified biomedical technician within 24 hours. We serve all major Texas cities and most rural areas. The quote is free and there's no obligation.
The Texas Health and Human Services Commission — Long-term Care Regulatory conducts CMS Life Safety surveys for skilled nursing facilities in Texas. Surveyors review equipment maintenance documentation during these surveys — including calibration logs, PCREE test records, and PM reports. Missing or outdated documentation is treated the same as missing testing and results in deficiency citations. Our technicians provide survey-ready documentation with every service visit.
NFPA 99 — incorporated into CMS Conditions of Participation — requires annual PCREE electrical safety testing at minimum for all patient care related electrical equipment. Texas SNFs must also perform pre-use testing on newly acquired equipment and post-repair testing after any maintenance work. Annual testing must be performed by a qualified technician with a calibrated electrical safety analyzer. Visit PCREE Test for Texas PCREE testing quotes.
CMS requires annual calibration of patient weighing scales in skilled nursing facilities, with documentation retained and available for surveyor review. Annual calibration should include as-found weight verification, calibration adjustment if needed, as-left weight verification, and a written calibration certificate with NIST-traceable standards documentation. Heavy-use scales may warrant semi-annual calibration.
Yes. Our network is designed to serve facilities outside major metro areas, including rural and small-town Texas SNFs and clinics. Submit your service request regardless of your facility's location — we will identify the best technician option in our network and provide routing solutions for facilities in areas with limited local coverage.
Yes. Medical Equipment Repair Network matches your facility with a qualified technician who actually services your area of Texas — not just a regional dispatch center. Whether you're in a major Texas metro area or a smaller community, submit a service request and we'll connect you with the right technician near you, typically within 24 hours.