Infusion Pump Repair & Preventive Maintenance
Repair, PM, and PCREE electrical safety testing for IV infusion pumps, PCA pumps, syringe pumps, and enteral feeding pumps. Written CMS survey documentation for every device serviced.
Get a Free Quote →Infusion pumps are high-risk equipment by any classification standard — inaccurate delivery rates directly affect patient safety and regulatory compliance. The FDA's Infusion Pump Improvement Initiative and CMS Life Safety surveys both focus heavily on infusion pump documentation. Under NFPA 99, infusion pumps used in patient care areas require annual PCREE electrical safety testing and documented preventive maintenance.
Medical Equipment Repair Network connects facilities with biomedical technicians experienced in infusion pump PM, flow rate verification, and repair across all major pump brands. We provide complete written documentation formatted for CMS and Joint Commission survey review.
Services Included
Annual Preventive Maintenance
Manufacturer-specified PM procedures: cleaning, filter inspection, battery testing, flow rate accuracy verification, alarm functional testing, and full written documentation.
PCREE Electrical Safety Testing
Leakage current and ground continuity testing for infusion pumps as required by NFPA 99. Written test report per unit for CMS survey documentation.
Flow Rate Verification
Delivery rate accuracy testing using gravimetric or volumetric methods. Documented results per pump against manufacturer specifications.
Battery Replacement
Battery testing and replacement for portable and pole-mounted pumps. Battery replacement documented in the device PM record.
Component Repair
Diagnosis and repair of keypad malfunctions, motor drive issues, door latch failures, display faults, and communication errors. OEM parts used where available.
Enteral Feeding Pump Service
PM and PCREE testing for enteral feeding pumps (Kangaroo, Compat, Moog Zevex) used in SNF and LTC settings.
Equipment We Service
- Volumetric IV infusion pumps (Baxter Sigma, ICU Medical Plum, BD Alaris)
- Syringe pumps
- PCA (patient-controlled analgesia) pumps
- Multi-channel infusion systems
- Ambulatory infusion pumps
- Enteral feeding pumps (Kangaroo, Compat, Moog)
- Elastomeric infusion devices (inspection only)
Frequently Asked Questions
Most infusion pump manufacturers specify annual PM. High-volume clinical settings may require semi-annual PM for heavily used pumps. The FDA's infusion pump guidance also recommends proactive recall and remediation tracking — our PM records include documentation of any open recalls affecting your pump inventory.
Yes. Enteral feeding pumps connected to AC power and used in patient care settings are subject to NFPA 99 PCREE testing requirements. Battery-only or gravity feeding setups without electrical patient connection are generally excluded, but should still be documented in your facility's PM program.
Flow rate verification confirms that the pump is delivering fluid at the programmed rate within manufacturer-specified accuracy tolerances. It is required by most manufacturer PM procedures and strongly recommended by the FDA and AAMI. Our technicians carry the appropriate equipment to perform gravimetric or volumetric flow testing.
Yes. Our network services all major infusion pump brands including BD Alaris (MedSystem III, PC Unit, TIVA), ICU Medical Plum 360, Baxter Sigma, and B. Braun Outlook. Contact us with your specific models and we will confirm technician availability in your area.
Find Infusion Pump Repair Services in Your State
Our network covers all 50 states. Select your state for local service availability: